Hp 850 g7 `endpoint security controller ' error ....

[bilen]

hp 850 g7 bios password my device
I disabled the password using rc unlocker

but now i am getting this error :

here is my original encrypted file :

[volinakis]

Re: 'Hp endpoint security controller ' error ....

hp 850 g7 bios password my device
I disabled the password using rc unlocker

but now i am getting this error :

here is my original encrypted file :

at 1st boot you have to enter bios setup - Security and restore security settings to factory defaults. put back original file, see if error goes away and then try again with unlocked file and restore security.

[hardware1]

Re: 'Hp endpoint security controller ' error ....

hp 850 g7 bios password my device
I disabled the password using rc unlocker

but now i am getting this error :

here is my original encrypted file :

Here's your Unlocked EC file, but I need your other chip to fix this End point problem. The chip could be 16MB or 32MB.

[bilen]

Re: 'Hp endpoint security controller ' error ....

at 1st boot you have to enter bios setup - Security and restore security settings to factory defaults. put back original file, see if error goes away and then try again with unlocked file and restore security.

that didn't work

[bilen]

Re: 'Hp endpoint security controller ' error ....

Here's your Unlocked EC file, but I need your other chip to fix this End point problem. The chip could be 16MB or 32MB.

here it is

[hardware1]

Re: 'Hp endpoint security controller ' error ....

here it is

In the first boot go to bios menu and disable security options (Default).

[bilen]

Re: 'Hp endpoint security controller ' error ....

In the first boot go to bios menu and disable security options (Default).

it does not work

[hardware1]

Re: 'Hp endpoint security controller ' error ....

it does not work

what you mean by doesn't work? no image, no power or password still there?
Program back your backup file and see if the device works or not.

[volinakis]

Re: 'Hp endpoint security controller ' error ....

what you mean by doesn't work? no image, no power or password still there?
Program back your backup file and see if the device works or not.

He has to program both chipsets with your files and after that power on laptop. if he programs one chipset and power on laptop it modifies the content of other chipset.

[bilen]

Re: 'Hp endpoint security controller ' error ....

He has to program both chipsets with your files and after that power on laptop. if he programs one chipset and power on laptop it modifies the content of other chipset.

the computer is working. but I keep getting the error on startup

[volinakis]

Re: 'Hp endpoint security controller ' error ....

the computer is working. but I keep getting the error on startup

program both chipsets with files provided by hardware1 and at 1st boot press F10 to enter bios setup, go to Security and at bottom you have restore security to factory defaults.

[bilen]

Re: 'Hp endpoint security controller ' error ....

program both chipsets with files provided by hardware1 and at 1st boot press F10 to enter bios setup, go to Security and at bottom you have restore security to factory defaults.

I did exactly what you said, but the error does not go away